How to use the platform lift

To ensure the safe operation and longevity of the lift, and to avoid triggering the PIT Safety Alarm, please observe the following:


1. Before Use
  • Maximum load: Do not exceed 300kg.
  • Ensure any load is evenly distributed and stable.
  • Wheelchair users must:
    • Engage brakes during movement.
    • Switch off electric wheelchairs.

2. Using Floor Controls
  • Insert the master key and turn it to the "1" position.
  • Press and hold the call button until:
    • The platform arrives (if not already there), and
    • The gate unlocks automatically.
  • Do not attempt to open the gate manually or before the platform has fully arrived at the landing. This may trigger a safety alarm and damage the gate mechanism.


3. Using On-Board Controls
  • Insert and turn the key on the on-board control panel.
  • Select your destination using the up/down button.
  • Hold down the button continuously until the lift reaches the landing.
  • The platform will stop and the gate will unlock automatically.
  • Turn the key back to "0" and remove it.


4. Emergency Use
  • The Emergency Stop Button halts the lift immediately.
  • To reset: Turn the button clockwise 45°.
  • The Alarm Button activates a buzzer for assistance if required.


5. Important Usage Rules
  • Do not push, pull or lean on the gate before it has unlocked.
  • The gate is designed to remain locked during travel.
  • Never force the gate open—doing so may damage the mechanism and trigger the PIT Safety Alarm.
  • Platform use is restricted to individuals with mobility needs, with or without assistance. Other uses are not permitted.


6. To Prevent Malfunctions
  • Always allow the lift to fully arrive at the destination before touching the gate.
  • Wait for the gate to unlock automatically—this indicates it's safe to enter or exit.
 ​